How to Make Potholders with Insul-Bright: Layers, Cutting and Tips

Folded white Insul-Bright insulated lining for sewing potholders

Homemade potholders are one of the most satisfying quick sewing projects: they use up fabric scraps, they make great gifts, and they get used every day. The secret to a potholder that actually protects your hands is what goes inside it. That's where Insul-Bright comes in.

What is Insul-Bright?

Insul-Bright is an insulated lining made by The Warm Company. It combines needlepunched polyester fibres with a reflective metallized film that helps reflect hot or cold energy back toward its source. It's soft and flexible, so it sews much like regular batting, and it's made for projects like potholders, oven mitts, casserole carriers, lunch bags and ironing board covers.

One important note: Insul-Bright is heat resistant, not heat proof. On its own it isn't enough for a potholder. Pair it with cotton batting, as explained below.

What you'll need

  • Insul-Bright insulated lining
  • 100% cotton batting, such as Warm & Natural
  • Cotton fabric for the front and back (scraps or fat quarters work well)
  • Binding fabric or bias tape, plus a small loop for hanging if you like
  • Rotary cutter, ruler and a sewing machine with a fresh needle

How to layer a potholder

The layer order is what makes a potholder work. Stack your pieces like this, starting from the side that will touch hot pans:

  1. Front fabric (right side facing out)
  2. Insul-Bright, with the more reflective side facing the hot side
  3. Cotton batting, at least one layer
  4. Back fabric (right side facing out, toward your hand)

The Warm Company recommends using at least one layer of cotton batting with Insul-Bright for potholders and oven mitts. The cotton absorbs moisture and adds extra protection between the heat and your hand. If you're following a pattern, go with its layering instructions, since methods vary a little from pattern to pattern.

Want extra-thick potholders for heavy cast iron? Add a second layer of cotton batting rather than a second layer of Insul-Bright. It keeps things easier to sew.

How many potholders from one piece?

Our Insul-Bright pre-cut measures 45" x 1 yard (36"). Each potholder uses one layer of Insul-Bright. Cut 8½" squares (5 across and 4 down) and you'll get up to 20 squares, enough for 20 standard 8" potholders, with a little left over for straightening edges. Making larger 10" potholders? You'll get 12.

That makes one piece perfect for a batch of holiday gifts or a craft fair table.

Step by step

  1. Cut your front fabric, back fabric, Insul-Bright and cotton batting into squares of the same size (for example 8½").
  2. Layer them in the order above and pin or clip around the edges.
  3. Quilt through all layers. Simple straight lines or a grid about 1" apart work well and keep the layers from shifting. A walking foot helps.
  4. Trim the edges square, to 8" for example.
  5. Bind the edges with binding or bias tape, tucking a fabric loop into one corner if you want to hang it.

Safety tips

  • Never put Insul-Bright in the microwave. The metallized film is not microwave safe. For microwave bowl cozies, use 100% cotton batting and cotton thread instead.
  • Always include cotton batting in potholders and oven mitts, not Insul-Bright alone.
  • Use cotton fabric on the outside. Synthetic fabrics can melt against hot pans.
  • If you're giving potholders as gifts, it's a nice touch to mention that they're not for microwave use.

Caring for your potholders

Insul-Bright doesn't need to be pre-washed. Finished projects can be machine washed and dried; follow the directions on the package.

Stock up for your next batch

We stock genuine Insul-Bright here in Canada with free shipping across Canada on every order. Making a lot of gifts? Each extra piece of Insul-Bright is 25% off, applied automatically in your cart.

Shop Insul-Bright

Have a question about your project? Send us a message. We're happy to help.